puma560gui - Vismach Virtual Machine GUI
puma560gui is one of the sample Vismach GUIs for LinuxCNC, simulating a Puma 560 robot arm.
See the main LinuxCNC documentation for more details.
https://linuxcnc.org/docs/html/gui/vismach.html
linuxcnc(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.
None known at this time.
This man page written by Andy Pugh, as part of the LinuxCNC project.
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.