qtvcp - Qt-based virtual control panels
qtvcp [OPTIONS] myfile.ui
QtVCP is a system for creating user interfaces for LinuxCNC.
Full documentation at https://linuxcnc.org/docs/html/gui/qtvcp.html
-h, --help
Show this help message and exit.
-c [<NAME>]
Set component name to NAME. Default is basename of UI file.
-a
Set the window to always be on top.
-d
Enable debug output.
-v
Enable verbose debug output.
-q
Enable only error debug output.
-g [<GEOMETRY>]
Set geometry WIDTHxHEIGHT+XOFFSET+YOFFSET. Values are in pixel units, XOFFSET/YOFFSET is referenced from top left of screen. Use -g WIDTHxHEIGHT for just setting size or -g +XOFFSET+YOFFSET for just position.
Example: -g 200x400+0+100
-H [<FILE>]
Execute HAL statements from FILE with halcmd after the component is set up and ready.
-i
Enable info output.
-m
Force panel window to maximize.
-f
Force panel window to fullscreen.
-t [<THEME>]
Set Qt style. Default is system theme.
-x [<XID>]
Reparent QtVCP into an existing window XID instead of creating a new top level window.
--push_xid
Reparent window into a plug add push the plug xid number to standardout.
-u [<USERMOD>]
File path of user defined handler file.
-o [<USEROPTS>]
Pass USEROPTS strings to handler under self.w.USEROPTIONS_ list variable.
linuxcnc(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.
None known at this time.
This man page written by Andy Pugh, as part of the LinuxCNC project.
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.