reset - Resets an IO signal
|
loadrt reset [count=N|names=name1[,name2...]] |
Component to reset IO signals.
This function works like a conditional sets - it is fed with a float and/or bit/s32/u32 pins that are I/O, but are save the value only if the "trigger" pin is set. The values assigned to those signals are passed via the input pins reset_float/s32/u32/bit.
reset.N (requires a floating-point thread)
Update the output value
reset.N.trigger bit in
Trigger input
reset.N.out-u32 u32 io (default: 0)
Unsigned 32 bit integer output value
reset.N.reset-u32 u32 in (default: 0)
Unsigned 32 bit integer reset value
reset.N.out-s32 s32 io (default: 0)
Signed 32 bit integer output value
reset.N.reset-s32 s32 in (default: 0)
Signed 32 bit integer reset value
reset.N.out-float float io (default: 0.0)
Float output value
reset.N.reset-float float in (default: 0.0)
Float reset value
reset.N.out-bit bit io (default: false)
Bit integer output value
reset.N.reset-bit bit in (default: false)
Bit reset value
reset.N.retriggerable bit in (default: true)
Allow additional edges to reset
reset.N.rising bit in (default: true)
Trigger on rising edge
reset.N.falling bit in (default: false)
Trigger on falling edge
Alexander Rössler
GPL