image-to-gcode(1)

image-to-gcode

image-to-gcode converts a bitmap image to G-code inteerpreting the brightness of each pixel as a Z-height.

linuxcnc(1)

Detailed docs: https://linuxcnc.org/docs/devel/html/gui/image-to-gcode.html

Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.

None known at this time.

This man page written by Andy Pugh, as part of the LinuxCNC project.

Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.

Copyright © 2020 Andy Pugh.

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.