SYNOPSIS
loadrt steptest [count=N|names=name1[,name2…]]
FUNCTIONS
- steptest.N (requires a floating-point thread)
-
PINS
- steptest.N.jog-minus bit in
-
Drive TRUE to jog the axis in its minus direction
- steptest.N.jog-plus bit in
-
Drive TRUE to jog the axis in its positive direction
- steptest.N.run bit in
-
Drive TRUE to run the axis near its current position_fb with a trapezoidal velocity profile
- steptest.N.maxvel float in
-
Maximum velocity
- steptest.N.maxaccel float in
-
Permitted Acceleration
- steptest.N.amplitude float in
-
Approximate amplitude of positions to command during run
- steptest.N.dir s32 in
-
Direction from central point to test: 0 = both, 1 = positive, 2 = negative
- steptest.N.position-cmd float out
-
- steptest.N.position-fb float in
-
- steptest.N.running bit out
-
- steptest.N.run-target float out
-
- steptest.N.run-start float out
-
- steptest.N.run-low float out
-
- steptest.N.run-high float out
-
- steptest.N.pause s32 in (default: 0)
-
pause time for each end of run in seconds
PARAMETERS
- steptest.N.epsilon float rw (default: .001)
-
- steptest.N.elapsed float r
-
Current value of the internal timer
AUTHOR
Jeff Epler
LICENSE
GPL