SYNOPSIS
loadrt multiswitch personality=P [cfg=N]
- cfg
-
cfg should be a comma-separated list of sizes, for example cfg=2,4,6 would create 3 instances of 2, 4 and 6 bits respectively. Ignore the "personality" parameter, that is auto-generated.
FUNCTIONS
- multiswitch.N (requires a floating-point thread)
-
PINS
- multiswitch.N.up bit in (default: false)
-
Receives signal to toggle up
- multiswitch.N.down bit in (default: false)
-
Receives signal to toggle down
- multiswitch.N.bit-MM bit out (MM=00..personality) (default: false)
-
Output bits
PARAMETERS
- multiswitch.N.top-position u32 rw
-
Number of positions
- multiswitch.N.position s32 rw
-
Current state (may be set in the HAL)
AUTHOR
ArcEye schooner30.AT.tiscali.co.uk / Andy Pugh andy.AT.bodgesoc.org
LICENSE
GPL