lineardelta(1)

lineardelta is one of the sample Vismach GUIs for LinuxCNC, simulating a delta robot with linear actuators

linuxcnc(1)

See the main LinuxCNC documentation for more details. https://linuxcnc.org/docs/html/gui/vismach.html

None known at this time.

This man page written by Andy Pugh, as part of the LinuxCNC project.

Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.

Copyright © 2020 Andy Pugh.

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.