image-to-gcode - converts bitmap images to G-code
image-to-gcode
image-to-gcode converts a bitmap image to G-code inteerpreting the brightness of each pixel as a Z-height.
linuxcnc(1)
Detailed docs: https://linuxcnc.org/docs/devel/html/gui/image-to-gcode.html
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.
None known at this time.
This man page written by Andy Pugh, as part of the LinuxCNC project.
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.